Drives: Dell OptiPlex 320 User's Guide
1 floppy drive
2 drive release latch
5. If you are replacing the floppy drive, see
Otherwise, replace the drive panel by aligning its hinges and rotating it up until it snaps into place.
6. Replace the computer cover (see
Installing the Floppy Drive
1. If you are replacing a floppy drive, remove the shoulder screws from the existing drive and attach the screws to the
replacement drive.
2. If you are installing a new floppy drive:
a. Remove the drive-panel insert for your new drive (see
b. Remove the shoulder screws from the inside of the drive-panel insert.
c. Attach the screws to the new drive.
3. Align the shoulder screws on the floppy drive with the shoulder screw slots, and gently slide the drive into the bay until
it clicks into place.
file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/mt_drive.htm[5/22/2015 10:43:38 AM]
Installing the Floppy
Replacing the Computer
Cover).
Drive.
Drive-Panel
Inserts).