Table of Contents
Advertisement
Removing the Computer Cover: Dell OptiPlex 320 User's Guide
Back to Contents Page
Removing the Computer Cover
Dell™ OptiPlex™ 320 User's Guide
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the computer cover.
1. Follow the procedures in
2. If you have installed a padlock through the padlock ring on the back panel, remove the padlock.
3. Slide the cover release latch back as you lift the cover.
4. Pivot the cover up using the hinge tabs as leverage points.
5. Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.
1 security cable slot
2 cover release latch
3 padlock ring
Back to Contents Page
file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/dt_remov.htm[5/22/2015 10:44:00 AM]
Before You
Begin.
Advertisement
Table of Contents
