Back Panel Connectors - Dell OptiPlex 320 DCSM User Manual

Mini Tower Computer: Dell OptiPlex 320 User's Guide
1 cover release This latch allows you to open the computer cover.
latch
2 padlock ring Insert a padlock to lock the computer cover.
3 power connector Insert the power cable into this connector.
4 voltage Your computer is equipped with either an auto-sensing voltage selector or
selection switch a manual voltage-selection switch. Computers with an auto-sensing
(may not be voltage selector do not have a voltage selection switch on the back panel
available on of the computer and can automatically detect the correct operating
certain voltage.
computers)
To help avoid damaging a computer with a manual voltage-selection
switch, set the switch for the voltage that most closely matches the AC
power available in your location.
NOTICE:
even though the AC power available in Japan is 100 V.
Also, ensure that your monitor and attached devices are electrically rated
to operate with the AC power available in your location.
5 back-panel Plug serial, USB, and other devices into the appropriate connector.
connectors See
6 card slots Access connectors for any installed PCI and PCI Express cards.
Back-Panel Connectors
file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/mt_about.htm[5/22/2015 10:43:05 AM]
The voltage selection switch must be set to the 115-V position
for details.
Back-Panel Connectors