Installing A Floppy Drive - Dell Dimension 3100/E310 Service Manual

1 sliding plate lever
2 sliding plate
3 floppy drive
5. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
6. Replace the
7. Replace the
NOTICE:
8. Connect your computer and devices to their electrical outlets, and turn them on.

Installing a Floppy Drive

NOTE: In the event that the replacement or new floppy drive does not have shoulder screws, use the screws located within the drive-panel insert.
1 drive
2 screws (4)
1. Follow the procedures in
2. Remove the
3. If you are installing a new floppy drive rather than replacing a drive, remove the
screws located in the back of the drive-panel insert to the drive.
4. Gently slide the drive into place until you hear a click or feel the drive securely installed.
Great user manuals database on
drive panel.
computer cover.
To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.
"Before You Begin."
drive panel.
UserManuals.info
drive-panel insert from the FlexBay, and then attach the shoulder