Dell OptiPlex 320 DCSM User Manual page 62

Troubleshooting Tools and Utilities: Dell OptiPlex 320 User's Guide
Controller has failed —
Data error — See Drive
Decreasing available memory —
See Lockups and Software
Diskette drive 0 seek failure —
Diskette read failure —
See Drive Problems.
Diskette subsystem reset failed —
Diskette write protected —
Drive not ready —
Gate A20 failure —
See Lockups and Software
Hard-disk configuration error —
Hard-disk controller failure —
Hard-disk drive failure —
Hard-disk drive failure —
See Drive Problems.
Insert bootable media —
Invalid configuration information - please run SETUP program —
computer configuration information (see
Keyboard failure —
Memory address line failure at address, read value expecting value —
Problems.
Memory allocation error —
1. Turn off the computer, wait 30 seconds, and then restart the computer.
2. Try to run the program again.
3. If the error message appears again, see the software documentation for additional troubleshooting
suggestions.
Memory data line failure at address, read value expecting value —
file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/trouble.htm[5/22/2015 10:43:21 AM]
See Drive Problems.
Problems.
Problems.
See Drive Problems.
Run the Dell Diagnostics. See
Slide the write-protect notch on the floppy disk to the open position.
Put a floppy disk in the drive.
Problems.
Insert a bootable floppy disk or CD.
System
See Keyboard Problems.
Dell
Enter system setup and correct the
Setup).
Diagnostics.
See Lockups and Software