System Setup Options - Dell OptiPlex 320 DCSM User Manual

Advanced Features: Dell OptiPlex 320 User's Guide
screen is divided into three areas: the options list, active options field, and key functions.
Options List — This field appears on the left side of the system setup
window. The field is a scrollable list containing features that define the
configuration of your computer, including installed hardware, power
conservation, and security features.
Scroll up and down the list by using the up and down arrow keys. As an
option is highlighted, the Option Field displays more information about
that option and the option's current and available settings.

System Setup Options

NOTE: Depending on your computer and installed devices, the items listed in this section may or may not appear.
System
Lists the computer name, BIOS Version, Service Tag, Express Service Code, (if applicable), and the Asset
System
Info
Tag. None of these fields can be modified.
Identifies the CPU type, bus speed, clock speed, and L2 cache size. States whether the processor is Hyper-
Processor
Info
Threading and multiple-core capable and whether it supports 64-bit technology.
Lists the type, size, speed, and channel mode (dual or single) of installed memory.
Memory
Info
Identifies any installed PCI or PCI Express cards.
PCI Info
Date/Time Displays current date and time settings.
The computer attempts to boot from the sequence of devices specified in this list.
Boot
Sequence
Drives
This option enables or disables the floppy drive. The options are Off, Internal, USB, and Read Only.
Diskette
Drive
(Internal
NOTE:
default)
Identifies and enables and disables the drives attached to the SATA or IDE connectors on the system
Drive 0
through Drive
board and lists the capacities for the hard drives.
n
NOTE:
computers and Drive 0 though Drive 5 for the ultra small form factor computer.
This setting determines whether integrated drive errors are reported or not during system startup.
SMART
file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/advfeat.htm[5/22/2015 10:43:10 AM]
If USB is selected, ensure that USB Controller setup option under Onboard Devices is set to On.
These options appear as Drive 0 through Drive 3 for the desktop, mini tower, and small form
Option Field — This field contains
information about each option. In this field
you can view your current settings and make
changes to your settings.
Use the right- and left-arrow keys to
highlight an option. Press <Enter> to make
that selection active.
Key Functions — This field appears below
the Option Field and lists keys and their
functions within the active system setup field.