Table of Contents
Advertisement
Name of each parts
Control panel &
Remote Control (optional on request)
- When the unit is in standby, you cannot use settings.
- Settings with remote control (optional on request)
and control panel can be used after the unit is started
with button 4.
- If no settings are used, the light indicator disappears
after 10 seconds.
-
The display lights up only when settings applied on
the control panel.
[1] Main power switch (on/off )
[2] Indication, start and standby (green)
[3] Indication, filter maintenance (orange)
[4] Start and Stand by button
[5] Filter Maintenance (reset button)
[6] Button, setting air flow (3 step)
[7] Button, setting moisture sensitivity (9 step)
[8] Button, choice of Mode location
[9] Indication, preset airflow
[10] Indication, selected moisture sensitivity
[11] Indication, selected mode
[12] Indication, filter cleaning (orange light)
[13] Indication, operation (green light)
[6]
[7]
[8]
[1]
[2]([13])
[3] ([12])
6
Calido
[5] [12]
[9]
[10]
[11]
[4] [13]
Advertisement
Table of Contents
