Table of Contents
Advertisement
Installation
[16] Fix the unit with four screws in
the mounting plate. Use the
long bit 200mm PH2
that's included.
[18] Cut and strip the cable to length, connect the cable to the N and L in the
terminal and fit the strain relief.
[19] Replace the terminal box cover.
Turn on the main switch.
Then push the front panel in place
and lock the panel with the lever.
[17] Install the duct to the SA adapter and fix
the duct and adapter with supplied screw.
Use the duct more
than 1.5m.
Terminal
Strain relief
18
Main switch
Advertisement
Table of Contents
