Dimension And Installation - Vent-Axia Lo-Carbon Calido Installation & Operation Instructions

Dimension / Installation
85
Parts included in delivery:
Screws for mounting the main unit 4pcs
Screws for mounting plate
Screws for the SA adapters
Screw cap, SA adapters
Screw SA duct
Mounting plate
Wall Seal A
Wall Seal B
Drilling Template
Long bit 200mm PH2
[1] Fix the drill template to the
ceiling or wall with adhesive tape
and mark the position of the
mounting plates four corners with
a pen.
Ensure the screws are in a solid
surface, wood stud or similar.
[2] Mark the center position for pipes.
Drilling templates
Dimension:
Calido
720
595
6
6
6
2
1
1
1
1
1
[1]
These holes show center of
pipe.
[2]
14
Marking place on the template
for the mounting plate four corners.
85