Remote Control; Activating Mobilestart - Miele DGC7860 Operating And Installation Instructions

Settings
– Activate
This setting is only visible if
Miele@home is deactivated. The Wi-
Fi function is reactivated.
–
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the Wi-
Fi function is switched off.
– Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the Wi-Fi
reception quality, network name and
IP address.
–
Set up again
This setting is only visible if a Wi-Fi
network has already been set up.
Reset the network settings and
immediately set up a new network
connection.
– Reset
This setting is only visible if a Wi-Fi
network has already been set up. The
Wi-Fi function is deactivated and the
Wi-Fi network will be reset to the
factory default. You must set up a
new connection to the Wi-Fi network
to be able to use Miele@home.
–
Set up
This setting is only visible if there is
no existing Wi-Fi network. You must
set up a new connection to the Wi-Fi
network to be able to use
Miele@home.
52

Remote control

If you have installed the Miele@mobile
App on your mobile device, have
access to the Miele@home system and
have activated the remote control
function ( ), you can use the
On
MobileStart function to retrieve
information on steam oven cooking
programmes currently in progress or to
end a programme in progress.

Activating MobileStart

 Select the  sensor to activate
MobileStart.
The  sensor lights up. You can
operate your steam oven remotely with
the Miele@mobile App.
Directly operating the steam oven via
the touch display takes priority over
operating it via the remote control
function on the App.
You can use MobileStart as long as
the  sensor is lit up.