Configuring Hpe Oneview To Deploy Os Build Artifacts To Compute Modules - HP HPE Synergy 12000 Frame Setup And Installation Manual

Configuring HPE Configuring HPE OneView OneView to deploy OS build artifacts to compute modules
Once you add an Image Streamer OS deployment server in HPE OneView, you can launch the Image Streamer graphical user interface
from the HPE OneView OS Deployment Servers screen.
Procedure Procedure
1. Upload artifacts from a bundle or create new artifacts.
From the Image Streamer interface, the software administrator can upload artifacts from a bundle for use in HPE OneView or use the
Image Streamer interface to create golden images and other OS build artifacts.
2. Create or configure a server profile.
Create and apply a server profile which includes an OS deployment selection and values for the server-specific settings for the
selected OS deployment.
3. Verify operating system deployment.
Review server profile screen details to view the operating system volume that has been created as a result of deployment.
4. Power on the compute module.
Power on compute module to boot from deployed operating system.
For more information about using Image Streamer to create and deploy OS build artifacts, see the Image Streamer online help or the
Image Streamer User Guide on the Hewlett Packard Enterprise website (http://www.hpe.com/info/synergy-docs
to deploy OS build artifacts to compute modules

Configuring HPE OneView to deploy OS build artifacts to compute modules

http://www.hpe.com/info/synergy-docs).
147