HP HPE Synergy 12000 Frame Setup And Installation Manual page 46

Item Item Description Description
6 USB port
7 LINK port activity
LED
8 LINK port
9 LINK port
connectivity LED
10 Monitor port
Function Function
Allows connection to the frame using a supported USB device. Devices include a
keyboard or mouse for connecting to the HPE Synergy Console. To connect multiple
devices, a USB hub (not included) is required.
Used for performing a USB recovery frame link module firmware update.
Reports LINK port activity:
Flashing green = Activity on the LINK port
Off = No activity on the LINK port
A 10GBASE-T RJ45 connector that provides two functions:
Provides high-availability management network connectivity between:
LINK ports on two frame link modules in the same frame for a single frame
configuration.
Frame link modules in different frames as part of a management network ring in
a multiframe configuration.
Provides management ring (frame link topology) connectivity for automatic frame
discovery by HPE OneView.
Reports LINK port connectivity:
Solid green = LINK port is connected.
Off = LINK port is not connected.
Allows connection to the frame using a monitor device or an active monitor port
adapter.
HPE Synergy Frame Link Module components and LEDs 46