HP HPE Synergy 12000 Frame Setup And Installation Manual page 64

Item Item Description Description
5 UID LED/button
6 Health LED
7 Link/Activity mode LED
8 PID mode LED
9 Ethernet mode LED
10 Fibre Channel (FC) mode
LED
3
1
See OneView (http://www.hpe.com/info/oneview/docs http://www.hpe.com/info/oneview/docs)
2
Remove and then reinstall the module.
3
When illuminated, QSFP+ port LEDs indicate the port operating states for each of the uplink ports in the selected mode.
Status Status
Solid blue = Activated
Flashing blue = Firmware upgrade in progress
Off = Deactivated
Solid green = Normal
Solid amber = No power present
Flashing amber = Module degraded
Solid red = A physical alignment error exists.
3
Solid green = Link/Activity mode is selected.
Solid green = PID mode is selected.
3
Solid green = Ethernet mode is selected.
3
Solid green = FC mode is selected.
2
HPE Synergy 40Gb F8 Switch Module LEDs and buttons 64