HP HPE Synergy 12000 Frame Setup And Installation Manual page 22

Item Item Name Name
14 Lift handles (optional)
15 Removable device bay shelves
16 Reusable zip ties for power supplies (single-
phase frames only)
17 CAT6A cable or DAC cable or SFP+ DAC
cable ,
1 3
18 HPE Synergy Start Here Poster
19 Installation instructions for compute
modules, options, and interconnects
20 HPE Synergy 12000 Frame Rack Template
1
Quantity as ordered
2
Quantity and type as ordered
3
Not shown
Description Description
3
The lift handles can be used to lift a frame into or out of a rack.
The removable device bay shelves can be used to partition the device
3
bays for full or half-height components.
Reusable zip ties that help prevent single-phase power cables from
disconnecting from the power connectors.
3
CAT6A or DAC cable or SFP+ cable for cabling frames, depending on the
frame link module ordered.
The quick setup poster provides an overview of the installation process.
3
The printed installation instructions for HPE Synergy components.
3
The printed template for locating the positions of frames, rack rails, and
3
cage nuts in a rack.
2.00 ft (60.96 cm) cable—Used for cabling two consecutive frames.
10.00 ft (304.80 cm) cable—Used for cabling the top frame to the
bottom frame in a rack.
21.00 ft (640.08 cm) cable—Used for cabling management links
requiring long runs to the top of the rack.
Pallet contents 22