Installing A Full-Height Compute Module - HP HPE Synergy 12000 Frame Setup And Installation Manual

Installing a full-height compute module

Installing a full-height
The HPE Synergy 12000 Frame ships with three device bay shelves installed to support a 12 half-height compute module configuration.
To install a full-height compute module, remove the device bay shelves and corresponding blanks.
Procedure Procedure
1. Remove the blanks.
2. Remove the device bay shelf.
NOTE: Keep the compute module end caps, blanks, and device bay shelves for future use. NOTE:
3. Remove the compute module end cap.
4. Prepare the compute module for installation by opening the compute module handle.
compute module
Installing a full-height compute module 90