Hpe Synergy 40Gb F8 Switch Module Leds And Buttons - HP HPE Synergy 12000 Frame Setup And Installation Manual

HPE Synergy 40Gb F8 Switch Module LEDs and buttons

HPE Synergy 40Gb F8 Switch Module LEDs and buttons
Item Item Description Description
1 Interconnect link port LEDs
2 QSFP+ port LEDs
3 NEXT button
4 Reset pin-hole
Status Status
Solid green = Linked
1
Solid red = Error detected .
Off = No link
The four LEDs above each port correspond to the 10GbE or 8Gb FC
channels of the port. The LEDs display one of four modes:
Ethernet mode:
Solid green = The port is configured as an Ethernet port.
Off = The port is not configured as an Ethernet port.
PID mode:
Solid green = The port is configured as an uplink port.
Solid amber = The port is configured as a stacking port.
Solid purple = The port is configured as a mirrored port.
Solid red = Error.
Solid blue = Activated by OneView for port identification.
Off = The port is not configured.
Link/Activity mode:
Solid green = 10Gb Ethernet link
Flashing green = 10Gb Ethernet activity
Solid amber = 8Gb FC link
Flashing amber = 8Gb FC activity
Solid purple = 40Gb Ethernet link
Flashing purple = 40Gb Ethernet activity
Solid Red = Error
Off = No link
Fibre Channel (FC) mode:
Solid green = The port is configured as an FC port.
Off = The port is not configured as an FC port.
To switch between the LED modes, press the NEXT button.
Selects the QSFP+ port LED mode.
Resets the module
HPE Synergy 40Gb F8 Switch Module LEDs and buttons 63