Appendix B—Regulatory Information; Fcc Regulations For Telephone Line Interconnection - Multitech CommPlete 4000 Series User Manual

Appendix B—Regulatory Information

FCC Regulations for Telephone Line Interconnection

1. This equipment complies with Part 68 of the Federal Communications Commission (FCC)
rules. On the outside surface of this equipment is a label that contains, among other
information, the FCC registration number and ringer equivalence number (REN).
If requested, this information must be provided to the telephone company.
2. As indicated below, the suitable jack (Universal Service Order Code connecting
arrangement) for this equipment is shown. If applicable, the facility interface codes (FIC)
and service order codes (SOC) are shown.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using a
compatible modular jack which is Part 68 compliant. See installation instructions for details.
3. The ringer equivalence number (REN) is used to determine the quantity of devices that may
be connected to the telephone line. Excessive REN’s on the telephone line may result
the devices not ringing in response to an incoming call. In most, but not all areas, the sum
of the RENs should not exceed five (5.0). To be certain of the number of devices that may
be connected to the line, as determined by the total REN’s, contact the telephone company
to determine the maximum REN for the calling area.
4. If this equipment causes harm to the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service may be required. But if advance
notice isn’t practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
5. The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modifications in
order to maintain uninterrupted service.
6. If trouble is experienced with this equipment (the model of which is indicated below)
please contact Multi-Tech Systems, Inc. at the address shown below for details of how to
have repairs made. If the equipment is causing harm to the telephone network, the
telephone company may request you remove the equipment from the network until the
problem is resolved.
7. No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or
its licensees. Unauthorized repairs void registration and warranty.
8. This equipment cannot be used on public coin service provided by the telephone company.
Connection to Party Line Service is subject to state tariffs. (Contact the state public utility
commission, public service commission or corporation commission for information.)
9. If so required, this equipment is hearing-aid compatable.
46
All manuals and user guides at all-guides.com
Manufacturer:
Model Number:
FCC registration number:
Ringer Equivalence No:
Service Center in USA:
Multi-Tech Systems, Inc.
MA6RF7216-S
AU7USA-23834-MM-E
0.3B
Modular Jack (USOC)
RJ11C or RJ11W (single line)
Multi-Tech Systems Inc.
2205 Woodale Drive
Mounds View, MN 55112
Voice (612) 785-3500/
FAX (612) 785-9874
CommPlete 4000 Communications Server Overview
in