Dante Device Info Panel; Linklicense Panel - Extron electronics FOX3 Matrix Series User Manual

5. When finished, click SAVE to
set the passwords. To close
the window without saving a
password, click CANCEL or the X in
the upper-right corner.
Passwords can be changed but they
cannot be removed entirely. The FOX3
must have passwords at all times.
These fields cannot be blank.

Dante Device Info Panel

The Dante Device Info panel (see figure 41,
Name and Firmware Version of a Dante device connected to the FOX3 Matrix.
Figure 49.

LinkLicense Panel

The LinkLicense panel (see figure 41,
applied to the FOX3 device (A LinkLicense can be uploaded using the Extron Toolbelt
software. See
NOTE: A user must have an Insider Account to download and use Toolbelt Software.
Contact an Extron support representative, to obtain an Insider Account.
Figure 50.
Dante Device Info Panel
Software/Firmware Installation
LinkLicense Panel
FOX3 Matrix Series Switcher • Internal Web Page
Figure 48. Passwords Dialog Box
, on page 61) displays the Device
6
) displays information about any LinkLicense
7
on page 40 to download the software).
65