Device Status Panel; Network Settings Panel - Extron electronics FOX3 Matrix Series User Manual

Device Status Panel

The Device Status panel (see figure 41,
time, time zone, the amount of time the device has been running (Uptime), and the internal
temperature in degrees Celsius.
To set the date and time:
1. Click EDIT (see figure 43 [left],
Settings panel opens to allow edits (right).
Figure 43.
2. Edit the Date/Time and Timezone as desired.
3.
When finished editing, click SAVE to confirm your changes or CANCEL to close the
window without making changes. Clicking the X in the upper-right corner of the screen
also closes the window.
4. Alternatively, click SYNC TO PC (

Network Settings Panel

In the Network Settings panel (see figure 41,
address, subnet mask, and gateway address for your FOX3, and turn DHCP On and Off.
To change the hostname:
1.
Click EDIT (see
Network Settings panel opens to allow edits (right).
2. Edit the Hostname (
3. When finished editing, click SAVE to confirm your changes or CANCEL to close the
window without making changes. Clicking the
also closes the window.
To set the IP addresses:
1. Click EDIT (see
Settings panel opens to allow edits (right).
2
) in the Device Status panel. The Device Status
1
Device Status Panel
) to set the date and time according to your PC.
2
figure 44 on page 63) in the Network Settings panel. The
[left],
1
, left) as desired.
2
) in the Network Settings panel. The Network
figure 44 [left],
1
FOX3 Matrix Series Switcher • Internal Web Page
on page 61) displays the current date,
), change the hostname, set the IP
3
in the upper-right corner of the screen
X
62