Table of Contents
Advertisement
Maintenance Summary - 2.000 Operating hours
C545
- Check cable and hose clamps for tight seating
Orientation
Procedure
Maintenance Instructions
G300.2 G320.2 G400.2 G420 G500.2 G520
DIE147EN - 17.08.2022
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
Cable and hose clamps are used to bundle and/or hold the cables and hoses in a
certain position.
Loose or faulty clamps can be abrasive to cables or hoses and damage them. Under
unfavorable circumstances, defective clamps may lead to "entangling" of the cables/
hoses, which may result in tearing off entire bundles.
1. Check cables for chafing and kinks.
2. Check cable and hose clamps for tight seating. In case of moving drags or
bundles, check for any movement within the function.
3.
Example: Power cabling G420
81
Advertisement
Table of Contents
