Table of Contents
Advertisement
Maintenance Summary - 2.000 Operating hours
It is recommended to document the maintenance activities carried out by using the appropriate
maintenance log. The maintenance log has the document number DIE148EN - 17.08.2022.
C010
- Check maintenance logs of servicing activities
C023
- Clean and check wipers of the work area door
C025
- Check work area door (with electr. drive) and window pane
C040
- Check and lubricate HSK clamping set (from Ott-Jakob)
C047
- Check tool clamping sets of the milling spindles
C050
- Check and potentially replace the cooling lubricant adapter (HSK tool mountings)
C065
- Check telescopic covers and wipers
C070
- Check outer wipers of linear guides
C080
- Check all electrical connections and drive belts of the drive motors
C095
- Check slat/shingle cover on the telescopes (visual inspection)
C130
- Replace filter on air conditioner cooling fan
C140
- Check cooling unit for cooling lubricant
C165
- Check coolant
C190
- Clean labyrinth rings of spindles
C510
- Check backup data carrier
C525
- Check control cabinet
C545
- Check cable and hose clamps for tight seating
C555
- Replace hydraulic fluid filters
C570
- Wassermann tool change system
C590
- Maintenance of turret steady rest SR2 or SLU X1 (by SMW)
50
Maintenance Summary - 2.000 Operating hours
G300.2 G320.2 G400.2 G420 G500.2 G520
Maintenance Instructions
DIE147EN - 17.08.2022
Advertisement
Table of Contents
