Table of Contents
Advertisement
Requirement
Procedure
100
Z control unit safety
-
1. 3/2-way valve on valve terminal
-
2. Safety pressure sensor
If the differential pressure sensor (12) outputs an error message, all
5 filter elements on the pneumatic system must be replaced.
Filters are hazardous waste and must be disposed of in a controlled
manner.
Service and maintenance are to be carried out according to the
manufacturer's specifications.
1. Check pressure setting on pressure gauge and adjust if necessary. An
operating pressure of 6 bar has been set at the factory.
Maintenance Summary - 4.000 Operating hours
G300.2 G320.2 G400.2 G420 G500.2 G520
Maintenance Instructions
DIE147EN - 17.08.2022
Advertisement
Table of Contents
