Table of Contents
Advertisement
Hydraulic Block for Yaw
Item
Hydraulic hoses for accumulators
Test sockets for accumulators
Yaw cylinders on spray boom
Return oil back to tractor
÷
NOTE! For more details, see the hydraulic diagram in the chapter
"Technical Specifications" in this book.
Alignment of Rubber Pads on Spray Boom
When the boom is folded, it must be checked that it rests correctly on the rubber pads. The rubber pads protect the boom
parts during folding and transport, so please check them for misalignment. The rubber pads also help to steer the boom
into the transport position.
Steps for adjustment:
1. Fold the boom and check the positions of the rubber pads (A).
They must be touching, when folding is completed.
2. If realigning is needed, loosen the four lock nuts (B) slightly.
Wrench size = 17 mm.
3. Move steel bracket with the rubber pad sideways to the wanted
position.
4. Tighten the four lock nuts to lock the position of the rubber pad.
5. Adjust other rubber pads on the boom as needed.
Port on hydraulic block
ACC1, ACC2, ACC3
MACC1, MACC2, MACC3, TM
C1, C2, C3
T
6 - Maintenance
187
Advertisement
Table of Contents
