Table of Contents
Advertisement
6 - Maintenance
Horizontal Alignment of Breakaway Section
Complete the following steps to adjust the breakaway to align it with the outer section of the boom.
1. Loosen the bolts and lock nuts (A) - but do not remove them.
2. There are four sets of bolts and nuts in all, mounted in both sides
of the steel bracket (B).
Wrench size = 17 mm.
On the picture, the bolt and nut are already removed from the one
hole. The slot holes in the steel bracket allows adjustment. The
steel bracket is attached to the breakaway
3. Align the breakaway with the outer section by moving the bracket.
4. Retighten the bolt and nuts. Torque = 180 Nm.
Adjustment is completed.
182
Advertisement
Table of Contents
