Maneuvering Of The Boom - Hardi COMMANDER DELTA FORCE Instruction Book

5 - Operation

Maneuvering of the Boom

Applicable for HC 6500 / HC 8600 / HC 9600 / ISOBUS.
±
WARNING! The folding functions must only be operated, when the sprayer is stationary! Failure to do so will damage
the boom.
μ
ATTENTION! The boom can not be operated with the tractor's hydraulic levers.
How To Unfold the Boom
1. Push the button (G) to lift the boom clear of the transport brackets.
This takes approximately 3 seconds.
2. The symbol
is now shown on the display.
If not, lock the pendulum by pushing
3. Push the button to the left (K) to unfold inner boom sections
completely.
Push the button in the middle to unfold outer sections 1.
Push the button to the right to unfold outer sections 2.
4. Push the button (H) to lower the boom to the correct working
height.
5. Unlock the pendulum by pushing
The symbol is now shown on the display.
How To Fold the Boom
μ
ATTENTION! If the SafeTrack function is installed, it must be
centre-aligned and locked before folding.
1. Push the buttons (D) or (E) to set a neutral slant angle (no slant).
2. Lock the pendulum by pushing
The symbol is now shown on the display
3. Push the button (G) to raise the boom to the highest possible
position.
4. Push the button to the right (L) to fold outer sections 2.
Push the button in the middle to fold outer sections 1.
Push the button to the left to fold inner sections.
5. Push the button (H) to lower the boom, until it is resting in the ParaLift locks.
6. Push the buttons (B) and (C) to lower the left and right boom wings, until they are resting in the transport brackets.
108
for 1 second.
for 1 second.
for 1 second.
L
K