Nikon NPL-632 Instruction Manual page 46

3 Getting Started
Key
32 Field Station NPL-632 Instruction Manual
Function
Records measured data, moves on to the next screen, or confirms and
accepts the entered data in input mode.
You have the option to record the measurement as a CP record
instead of an SS record, if you hold this key down for one second in
the Basic Measurement Screen (BMS).
The instrument outputs the current measurement data (PT, HA, VA,
and SD) on the COM port if you press this key in the BMS or in a
Stakeout observation screen. (The Data Rec settings must be set to
COM.)
Returns to the previous screen.
In numeric or alphanumeric mode, deletes input.
Starts distance measurement, using the measure mode settings for
the key.
[MSR1]
Displays measurement mode settings, if held down for one second.
Starts distance measurement, using the measure mode settings for
the key.
[MSR2]
Displays measurement mode settings, if held down for one second.
Moves to the next available display screen.
Changes the fields that appear on the DSP1, DSP2, and DSP3
screens, if held down for one second.
Displays the Angle menu.
Displays the Station Setup menu.
In numeric mode, enters 7. In alphanumeric mode, enters A, B, C, or
7.
Displays the Stakeout menu.
Shows stakeout settings, if held down for one second.
In numeric mode, enters 8. In alphanumeric mode, enters D, E, F, or 8.
Displays the Offset Point Measurement menu.
In numeric mode, enters 9. In alphanumeric mode, enters G, H, I, or 9.
Displays the Programs menu, which contains additional measuring
programs.
In numeric mode, enters 4. In alphanumeric mode, enters J, K, L, or 4.
Turns the Lumi-guide on or off.
In numeric mode, enters 5. In alphanumeric mode, enters M, N, O, or
5.
Displays RAW, XYZ, or STN data, depending on your setting.
In numeric mode, enters 6. In alphanumeric mode, enters P, Q, R, or
6.
Details
page 86
page 52
page 52
page 54
page 56
page 58
page 69
page 88
page 76
page 42
page 43