Nikon NPL-632 Instruction Manual page 89

If you press [ENT] without entering a PT name, you can enter temporary
coordinates which are not recorded in the job.
Alternatively, press the MsrPT softkey to measure a point.
3.
4.
Sta
O/S
dZ
5.
6.
7.
Using
You can use
angle-distance stakeout. For more information, see
display screens, page
Enter the second point (P2) of the line.
Enter offsets to the line.
Press in a blank field to enter the value
[ENT]
0.0000.
Distance from P1 along the line
Distance perpendicular to the line
(+) Right side of the P1-P2 line
(-) Left side of the P1-P2 line
Difference in height from the line
Rotate the instrument until the dHA is close to
0°00'00".
Sight the target and press
When a distance measurement is taken, the
difference from the design point appears.
To record the point as an SO record, press
to switch between display screens
[DSP]
to switch between display screens. This function works as in the
[DSP]
70.
or .
[MSR1] [MSR2]
.
[ENT]
Using [DSP] to switch between
Field Station NPL-632 Instruction Manual
Applications 4
75