Nikon NPL-632 Instruction Manual page 82

4 Applications
6.
7.
8.
9.
10. To finish the setup and record the station, press
Sample records
CO, Temperature:20C Pressure:1013hPa Prism:0 ...
ST,9005, ,265, ,1.2350,150.40300,150.40300
F1,265,1.6040,79.0010,90.30150,89.35260,
F1,200,1.4590,50.2300,269.4035,93.50110,
CO, P1-P2 HD=122.0350 VD=0.5600
68 Field Station NPL-632 Instruction Manual
After the measurement to P2 is completed, the
coordinates of the station are calculated.
To record the station, press
softkey.
To check your measurement, press the
softkey. If you defined the line by entering its
azimuth, HD and VD between P1 and P2 are
displayed.
If you defined the line by entering the P2
coordinates, the difference of HD (dHD) and
VD (dZ) between your measurement data and input coordinate data are
displayed.
Enter the station name, the height of instrument
(HI), and a feature code (CD) if required. The
station name defaults to the last recorded PT + 1,
or last recorded ST + 1, depending on the Split
ST setting.
Backsight (BS) defaults to the first point (P1).
To change it, highlight the BS field and then
press the softkey.
Change
in the BS field.
[ENT]
or the
REC
[ENT]
DSP