Table of Contents
Advertisement
To enter P1 and P2, enter point names or take
measurements to targets.
Enter the plus-minus angle, horizontal distance, and
vertical distance from the baseline defined by P1-P2.
If you do not enter a value in the dVD field, the value
0.0000 is used.
When you press
calculated. The PT name defaults to the last recorded
PT + 1.
To record the new point and return to the point input
screen, press
P1 (base PT) defaults to the previously recorded PT. P2
defaults to the previous P1.
To continuously calculate a new point, enter +Ang, HD, and dVD from the previous bearing line. This is a
convenient way to enter Traverse points.
Entering coordinates
To manually enter the XYZ coordinates, press
select
The PT name defaults to the last recorded PT + 1.
Enter the coordinates using the numeric keys. To move
to the next field, press
To store the point as an MP record and return to the
point input screen, press
PT is incremented to the next value.
You can record NE, NEZ, or Z-only data to the database.
in the dVD field, a new point is
[ENT]
.
[ENT]
in the Input menu.
Input XYZ
or
[ENT]
[ENT]
or
[3]
in a field
[v]
in the Z field. The default
Field Station NPL-632 Instruction Manual
Menu Key
5
1 07
Advertisement
Table of Contents
