Table of Contents
Advertisement
5
Menu Key
Editing coordinate records
You can edit PT, CD, and coordinate values in coordinate records.
You cannot edit the coordinate record for the current station.
1.
2.
3.
4.
Editing station records
Note – The system will not recalculate measurements if you change the station record.
All coordinate and raw data observed from an edited station record must be
recalculated in your postprocessing software.
In the RAW screen, use
record that you want to edit. Then press the
softkey.
12 8
Field Station NPL-632 Instruction Manual
Do one of the following:
In the XYZ screen, use
–
the record that you want to edit. Then press
the
softkey.
Edit
In the detailed data screen, press the
–
softkey.
Use
or
to highlight a field. Then modify the
[^]
[v]
value in the selected field.
To finish editing, press
A confirmation screen appears.
Do one of the following:
To accept the changes and return to the data
–
view screen, press
To go back to the edit screen, press
–
the
softkey.
No
or
[^]
or
to highlight
[^]
[v]
Edit
in the CD field.
[ENT]
or the
softkey.
Yes
[ENT]
[ESC]
to highlight the station
[v]
Edit
or
Advertisement
Table of Contents
