Installing The Magazine Into The Library - Quantum ATL PowerStor L200 Series User Manual

Chapter 3 Basic Library Operations
Eject/Unlock
Installing the
Magazine into the
Library
38
The library will remove all cartridges. Door Unlocked! is
displayed. This activity can take up to three minutes if a rewind
from end of tape is required.
Caution: Do not force the magazine door open. Wait until Door
Unlocked! is displayed before opening the door.
Swing open the magazine door.
6
Grasp the magazine and pull it out of the library.
7
To close the magazine door, push the door closed until it latches.
8
The library executes a scan magazine function. Upon completion,
EJECT/UNLOCK? is displayed.
If the optional bar code reader is present, labels are read.
To remove or insert a cartridge in the magazine, refer to
9
"Operating the Tape Library" on page 25.
To install the magazine into the library:
Procedure
3
Press Select until EJECT/UNLOCK? is displayed.
1
Press Next. Eject Cartridge? is displayed.
2
Press Next. Unlock Door? is displayed.
3
Press Enter. Are you sure? is displayed.
4
Press Enter to answer Yes.
5
The library removes all cartridges Door Unlocked! is
displayed. This activity can take up to three minutes if a rewind
from end of tape is required.
Press any button to stop the operation.
Caution: Do not force the magazine door open. Wait until Door
Unlocked! is displayed before opening the door.
Swing open the magazine door.
6
Procedure (continued)
Grasp the magazine handle and place the magazine on the library
7
door.
ATL PowerStor L200 Series Library User's Guide