Quantum ATL PowerStor L200 Series User Manual page 94

Appendix B OCP Error Messages and Error Definitions
"OCP Display
CLN slot Empty
CLN Tape Expired
NOT a CLN Tape
CUP FAILED! CUP
Timeout
Ldr/Drv Timeout
In Retry
Loader Timeout
In Retry
Prepos Timeout
In Retry
** Ldr Err<xx>***
Attention Needed
78
Description
A cleaning cartridge was not found in
the required slot (highest numbered
slot in unit).
The cleaning cycle was not completed
because the cleaning cartridge has
expired.
The cartridge in the cleaning slot is not
a cleaning cartridge.
The requested Code Update operation
failed and the unit timed out during
the code update process.
The command aborted after the
maximum number of retries was
exceeded.
The command aborted after maximum
number of retries was exceeded.
The command aborted after maximum
number of retries was exceeded trying
to preposition the elevator.
An error code xx was returned from the
loader. If the command was severe, the
doors will unlock and "Attention
Needed" is appended to the error
message.
Table 28 lists the error code, error type, and descriptions.
Note: If an unrecoverable error occurs, the error message will remain on the
OCP until another button is pushed.
ATL PowerStor L200 Series Library User's Guide
Recommended Operator Action
Insert cleaning cartridge in the highest
numbered slot in the unit and retry the
operation.
Replace the cleaning cartridge.
Insert a cleaning cartridge in the
cleaning slot.
Retry the operation. If the operation
fails again, contact an authorized field
service engineer.
Cycle the library power and try the
operation again. If the operation fails
again, contact an authorized field
service engineer.
Cycle the library power and try the
operation again. If the operation fails
again, contact an authorized field
service engineer.
Cycle the library power and try the
operation again. If the operation fails
again, contact an authorized field
service engineer.
See "Library Error Definitions" on
page 79 for a description of error codes
and the appropriate actions.