Figure 17 Sample SCSI
Cable Connection
Host
Next SCSI device or teminator
Procedure (continued)
Secure the cables, using the wire cable clamps or screws provided.
4
Connect the power cord to the power connector on the back of the
5
library (see figure 16).
Connect the other end of the power cord to the site power.
6
ATL PowerStor L200 Series Library User's Guide
Chapter 2 Installing the Cartridge Tape Library
Connecting the Tape Library
Library Controller (SCSI ID 0)
SCSI cables
Drive (SCSI ID 1)
21