Input Source Signal Selection - Ricoh PJ RU7700L Series User Manual

Basic Operations
 You can also
change the input
source by direct keys
on the remote control.
42
English

Input Source Signal Selection

Basic Operations
Press the Input button on the remote control or the control panel
on the rear and choose Computer, HDMI1, HDMI2, HDBaseT, DVI,
Memory Viewer, Network, or USB Display as the input source.
Menu operation
1) Press the Input
Input
source menu.
Auto
set
2) Press buttons to choose Computer, HDMI1, HDMI2, HDBaseT,

DVI, Memory Viewer, Network, or USB Display and press Enter
Menu
to select the input source.
Computer
Computer
If the input source is a computer that connects
to Computer In port with a RGB cable, choose
"Computer".
Volume
HDMI1
If the input source is a device that connects to the
HDMI 1 In terminal with an HDMI cable, choose
"HDMI 1".
HDMI 2
If the input source is a device that connects to the
HDMI 2 In terminal with an HDMI cable, choose
"HDMI 2".
HDBaseT
If the input source is a device that connected
to the HDBaseT terminal with a network cable,
choose "HDBaseT"
DVI
If the input source is a device that connected to
the DVI terminal with a DVI cable, choose "DVI"
Memory Viewer
If the input source is a device that connects to the
USB terminal, choose Memory Viewer.
To use Memory Viewer, see P79 for instruction.
button on the remote control to enter the input
AV
ECO
Mute
Picture
Enter
Freeze
Video
Aspect
Keystone
Magnify Status
Computer
HDMI 1
HDMI 2
√
HDBaseT
DVI
Memory Viewer
Network
USB Display
Memory Viewer