Table of Contents
Advertisement
Usage Notice
Protection cover installation
The installation of the protection cover consists of two parts: the
intake hood and the exhaust hood.
Exhaust hood installation:
1) Align the exhaust hood with the projector
2) Loosen 2 screws A (M3*110) and tighten the corresponding holes.
Please refer to the following figure for details:
A
A
Intake hood installation:
1) Align the two clips on the left side of the intake hood with the
machine
2) Loosen 2 screws (M3*110) and tighten them at the corresponding
hole position.
Please refer to the following figure for details:
Buckle place
A
A
20
English
Advertisement
Table of Contents
