Using The Power Cord Buckle - Ricoh PJ RU7700L Series User Manual

Basic Operations
 If you pull on the
power supply cord
while the connector
is fixed, the main unit
may fall down and be
damaged
40
English

Using the power cord buckle

To prevent the power cord from accidently removing from the
AC IN of the projector, use the power cord buckle.
CAUTION:
To prevent the power cord from coming loose, make sure that all the prongs of the
power cord are fully inserted into the AC IN terminal of the projector before using
the power cord stopper to fix the power cord. A loose contact of the power cord may
cause a fire or electric shock
Required tool: Screwdriver
Installing the power cord buckle
1. With the clamper facing the power supply cord, align the
tip of the power supply cord buckle with the hole below
the AC IN terminal and push it in.
2. Pass the power supply cord through the clamper and press
the clamper to fix it.
3. Pass the power supply cord through the clamper and press
the clamper to fix it.
Disconnecting the power cord
1. Pull to an appropriate position while pushing down the
knob of the power cord buckle.
2. Press down the knob on the clamper to open the clamper
and take out the power cord.
3. Push and pull the fitted part of the power cord buckle from
the left and right to remove it from the main unit.
Knob
Clamper
Clamper
Knob