Table of Contents
Advertisement
Options
Auto Source
Input Source
Laser settings
Lens Adjust
High Altitude Mode
Power Settings
Information
Select
Set
Auto Source
does not support
"USB Display",
"Memory
Viewer" and
"Network".
On
Off
Exit
Auto Source
When this function is turned "On", the projector will search for
other signals if the current input signal is lost. When this function
is turned "Off", it will only search a specified connection terminal.
Input Source
Use this option to enable/disable input sources. Press the ► key
to enter the sub menu and select which sources you require. Press
"Enter" to finalize the selection. The projector will only search for
inputs that are enabled.
Laser settings
This function is used to set the laser mode.
Laser Settings
Laser Power: Select "High" mode to enhance brightness. Select
"Normal" mode and the machine displays normal brightness. Select
User Settings
Options
Auto Source
On
Off
Input Source
Computer
HDMI 1
HDMI 2
HDBaseT
DVI
Select
Set
Laser Power
Laser Adjust
Select
Set
Exit
Normal
100%
Exit
73
English
English
Advertisement
Table of Contents
