Introduction
Do not touch or
remove any other
component except the
lens and parts related
to it. Otherwise,
you may experience
product failure,
electric shock, fire, or
other incidents.
Make sure model of
the lens is compatible
with your projector
before installing it.
For details on lens
and its installation,
please call local
dealers.
32
English
Lens Installation
Please follow steps given below to install lens after its
replacement or when optional ones are employed. Please
consult your dealers for details on optional lenses.
1. Remove the dust cover from the projector.
2. Prepare the projector lens.
Note:
!
Be sure to remove the lens cap on the back of the device. If
the lens component with the lens cover is mounted on the
projector at all times, it may cause a malfunction.
■ Separately sold product
REPLACEMENT LENS TYPE E1, E2, EM1, EM2, EM3, EM0
3. Insert the lens into the projector with the arrow on the lens label facing up.
● Insert the lens slowly and thoroughly into the projector.
Arrow
Guide slot
Bulge