Kerlink Wirnet iBTS Installation And Maintenance Manual page 80

Note 3: this PoE injector is intended for indoor applications only.
In case the PoE injector cannot be installed indoor, use an alternate PoE injector dedicated
to outdoor applications as detailed in §1.6.1.7.
1.6.1.6 Outdoor AC/DC Midspan PoE injector 30W
The outdoor AC/DC Midspan PoE injector 30W characteristics are detailed in the following
table:
Description
Ethernet data rates
Number of ports
PoE compatibility
PoE Output Power
PoE Output Voltage
PoE Pin Assignment and Polarity
Input Power Requirements
Dimensions
Weight
Connectors
Indicator
Operating Ambient Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Ingress protection
Corrosion resistance
Regulatory compliance
Electromagnetic Emission & Immunity
Surge protection
Safety Approvals
Classification
Internal Use
Confidential
Strict confidential
This document is the strict property of Kerlink and shall not be either copied nor sent without express
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Wirnet iBTS
Specification
10/100/1000Base-T
1
IEEE 802.3at
IEEE 802.3af backward compatible
30 Watts (Guaranteed)
55 VDC
4/5 (+), 7/8 (–)
AC Input Voltage: 100 to 240 VAC
AC Input Current: 1A @100-240VAC
AC Frequency: 50 to 60 Hz
170 mm x 140 mm x 60 mm
1400g
Shielded rugged RJ-45 with gasket
EIA 568A and 568B
None
-40°C to +65°C
Maximum 95%, Non-condensing
-40°C to +85°C
Maximum 95%, Non-condensing
IP66, NEMA 4X
ASTM B-117
RoHS
WEEE
CE
FCC Part 15, Class B
EN 55022 Class B (Emissions)
EN 55024 (Immunity)
EN 61000-4-5 Class 5 (6kV CM)
VCCI
GR-1089-CORE Issue 4
ITU-T K.20 6 kV on AC lines
UL 60950-1, UL 60950-22
GS Mark
written authorization of Kerlink
Kerlink m2m technologies reserved rights
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Page 80 / 221