Kerlink Wirnet iBTS Installation And Maintenance Manual page 172

4.5.3.1 Compact casing mounting kit
The Compact casing mounting kit is composed of a single mechanical part as shown below:
The Wirnet iBTS Compact is delivered with the compact casing mounting kit already installed
on the back.
4.5.3.2 Wall mounting
The Wirnet iBTS can be also mounted on a wall with 4 x M4 screws.
Classification
Internal Use
Confidential
Strict confidential
Figure 109 : Compact casing mounting kit dimensions
2 x M4 screws
Figure 110 : Compact casing - Wall mount
This document is the strict property of Kerlink and shall not be either copied nor sent without express
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Wirnet iBTS
4.5.3 Mounting of the compact enclosure
2 x M4 screws
written authorization of Kerlink
Kerlink m2m technologies reserved rights
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Page 172 / 221