Kerlink Wirnet iBTS Installation And Maintenance Manual page 157

To open the cover, you need to use a screwdriver that must be inserted in the slots A or B.
The screw driver can be a small one or a bigger one.
Small flat-blade screw driver:
Example: 64-978 3x50 Stanley
Push the screw driver into the slot A, and lift up and down, down and up, with progressive
strength and going deeper. It will clip. Don't be afraid to break it, if will be opened before, if
you do it step by step (progressive, to feel the point of opening).
Big flat-blade screw driver:
Example: 65-098 5,5x100 Stanley
Push the screw driver into the slot, (it won't enter completely) and lift up in turning the
screw driver into the slot (like to drive screws into the slot). Here you have to use more
strength because the lever arm is smaller.
Classification
Internal Use
Confidential
Strict confidential
Figure 96 : Open points of the compact enclosure
This document is the strict property of Kerlink and shall not be either copied nor sent without express
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Wirnet iBTS
A
B
written authorization of Kerlink
Kerlink m2m technologies reserved rights
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Page 157 / 221