Kerlink Wirnet iBTS Installation And Maintenance Manual page 48

HSPA
3GPP Release 8
GSM
GPRS
EDGE
3GPP Release 99
1.5.3.1 Mechanical description
The Dual WAN module is composed of four main mechanical parts:
 A "three-sides" flange including:
o the connectors and interfaces placement
o venting of internal boards through many holes
 A rear plate with fixing points for screwing on the blind threaded standoffs
 Two radiators used as right and left side flanges
Classification
Internal Use
Confidential
Strict confidential
Band 2 (1900MHz)
Band 4 (1700/2100MHz)
Band 5 (850MHz)
Band 8 (900MHz)
GSM 850 (850MHz)
EGSM 900 (900MHz)
DCS 1800 (1800MHz)
PCS 1900 (1900MHz)
Radiators
Back panel
connector
« 3 sides »
flange
Figure 21: Mechanical description of the Dual WAN module
This document is the strict property of Kerlink and shall not be either copied nor sent without express
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Wirnet iBTS
 Downlink: up to 42Mbps (category
24)
 Uplink: up to 5.76Mbps (category 6)
GPRS Multislot class 10
GPRS Multislot class 12
CS1 to CS4
MCS1 to MCS9
EDGE throughput up to 236kbps
1.5.3 Dual WAN Module
written authorization of Kerlink
Kerlink m2m technologies reserved rights
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Rear plate
Fixing points
for screwing
Page 48 / 221