Kerlink Wirnet iBTS Installation And Maintenance Manual page 139

第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；
經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性
電機設備之干擾。
The Wirnet iBTS 923 is also compliant to:

PLMN01: GSM900 and DCS1800 Mobile Equipment Technical Specifications, rev 09-05-
2012

PLMN08: the Third Generation Mobile Telecommunication Terminal Equipment
Technical Specifications

CNS 13438: 2006 - Information technology equipment – Radio disturbance
Characteristics – limits and methods of measurement.

CNS 14336-1: 2010 - Information Technology Equipment – Safety – Part 1: General
requirements.
The LoRa frequency plan and channel allocation for Taiwan is defined in the LoRaWAN
specification and the regional parameters, as defined in [1] and [2], according to "AS
923MHz".
The Wirnet iBTS 923 and Wirnet iBTS Compact 923 own a MCMC Type Approval with the
identification
respectively. The expiry date is 23/11/2022.
The following SLP certification mark is available on the external label:
No CID is available so far. It will be provided later on.
In Malaysia, the Wirnet iBTS 923 is considered as a Short Range Device (SRD) according to
"MCMC MTSFB TC T007: 2014, 1st Rev".
The Wirnet iBTS 923 uses the 919-924MHz band with a maximum 500mW EIRP, according to
"CLASS ASSIGNMENT NO. 1 OF 2017".
Item
Frequency range
Max EIRP
Max conducted power with 3dBi antenna
Max conducted power with 6dBi antenna
Classification
Internal Use
Confidential
Strict confidential
number RFFT/01A/1117/S(17-3593)
This document is the strict property of Kerlink and shall not be either copied nor sent without express
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Wirnet iBTS
2.3.9 Malaysia
and
Specification
919-923MHz
923-924MHz (1% duty cycle)
0.5W
250mW (24dBm)
125mW (21dBm)
written authorization of Kerlink
Kerlink m2m technologies reserved rights
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
RFFT/02A/1117/S(17-3594)
Page 139 / 221