Kerlink Wirnet iBTS Installation And Maintenance Manual page 175

One part is mounted on the top of the enclosure and the second one on the bottom of the
enclosure. The parts include several holes and slots dedicated to wall mount screwing and
strapping. The holes are also used for earthing through a M8 bolt and nut (see §4.6.1.1).
The Wirnet iBTS is delivered with the standard casing mounting kit already installed on the
rear side:
Classification
Internal Use
Confidential
Strict confidential
Figure 114 : Standard casing mounting kit dimensions
Figure 115 : Rear view of the standard casing with mounting kit
This document is the strict property of Kerlink and shall not be either copied nor sent without express
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Wirnet iBTS
written authorization of Kerlink
Kerlink m2m technologies reserved rights
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Page 175 / 221