Firmware Update - Mobius Mini2 User Manual

Firmware Update

New firmware versions usually correct issues found in previous versions but often provide new
functionality which was not previously available.
►You must use a memory card formatted to FAT32 in order to update the firmware. Cards
with a capacity up to 32GB are natively formatted with FAT32. Larger cards are natively
formatted with exFAT and cannot be used to update the firmware.
Use mSetup (Tools) to automatically update the firmware. This is by far the easiest method.
Manual Firmware Update
DO NOT PRESS ANY BUTTONS during the firmware update process.
There are two methods with which you can update the firmware.
Method 1 without pressing any buttons (recommended method):
•
Turn off the camera.
•
Connect the camera to the computer and wait until the card is recognized as a
Removable Drive.
•
Copy the new firmware files into the camera's flash card root folder.
•
Disconnect the camera from the computer and wait until it turns off.
•
Wait until all the LEDs are turned off.
•
Connect the camera to the PC. The green LED, indicating the battery is charging, may
turn on. WAIT.
•
The LEDs will blink rapidly indicating the firmware is being updated.
•
The firmware will be updated when the LEDs stop flashing and the camera is recognized
as a Removable Drive.
•
The firmware file will have been automatically deleted.
Method 2 by pressing the power button :
•
Turn off the camera.
•
Connect the camera to the computer and wait until the card is recognized as a
Removable Drive.
•
Copy the new firmware files into the camera's flash card root folder.
•
Disconnect the camera from the computer and wait until it turns off.
•
Wait until all the LEDs are turned off.
•
Turn on the camera and WAIT.
•
The LEDs will blink rapidly indicating the firmware is being updated.
•
The firmware will be updated when the LEDs stop flashing.
•
The firmware file will have been automatically deleted.
•
The camera is now ready for use.
►After updating the firmware the date and time and all parameters will be reset to their default
values.
WAIT
WAIT