Mobius Quick Start Manual

Description
The above picture shows the arrangement of the user operating features.
The Quick Start Guide assumes standard settings. More detailed instructions including advanced
features such as Webcam mode, configuration and fault finding can be found in the Mobius Instruction
Manual which can be downloaded from
Before you start
Before using the camera for the first time, ensure that it is fully charged.
•
Connect one end of the supplied standard USB cable to the camera.
•
Connect the other end to a USB, 5V DC power source (wall charger, PC or external battery).
•
When the Yellow LED turns on, briefly press the Power Button to turn the camera OFF.
•
Wait until the green LED turns OFF. This can take up to 2.5 hours if the battery is fully discharged.
A new, fully charged battery will last about 80 minutes.
Turn on Camera
Power-On can be configured as "fast" or "delayed". The following instructions assume the Power-On is
configured as "fast" (standard setting)
•
Ensure you have a Micro SDHC or Micro SDXC card inserted in the camera.
•
► Referring to the picture above, insert the SD card upside-down into the SD Card slot with the
gold contacts at the top and pointing forward.
•
Briefly press the Power Button.
•
The blue LED will turn on for a second.
•
The blue LED will turn off and the firmware will start to load.
•
After about 3 seconds the yellow LED will turn on indicating the camera is ready in Video Mode 1.
•
► With the standard settings, you must start a recording within 30 seconds. Otherwise, the camera
will automatically turn off.
Quick Start Guide for the Mobius ActionCam
http://www.mytempfiles.info/mobius/index.html