Osd (On-Screen Display) Menu; Firmware Update - Mobius Mini ActionCam User Manual

OSD (On Screen Display) Menu
Connect the camera to a monitor or TV and then turn it on.
► Long Press the Shutter button to enter Setup Mode. See above (Camera Setup -
Manual configuration).
► To enter Playback Mode, press the Mode button to cycle from Video Mode1 -> Video
Mode2 -> Photo Mode -> Playback Mode.
► When in Video Mode1, Video Mode2 or Photo Mode double-click the Shutter button
to turn the OSD overlay (text/icons) off or on.
► When in Video Mode1 or Video Mode2 double-click the Mode button to turn the
microphone on or off.
► Playback Mode. Double-click the Mode button to cycle between the Video, Photo and
Locked folders
•
Double-click the Mode button to cycle between the Video, Photo and Locked
folders
•
Use the Mode (Down) or Power (Up) buttons to select the file to play.
•
In Video Mode, briefly press the Shutter button to play the video. See below
(Playback Mode -> Video playback)
•
In Photo Mode, double-click the Shutter button to exit Playback mode and return
to Video Mode1.
•
Double-click the Shutter button to exit Playback mode and return to Video
Mode1.
► Playback Mode -> Video playback
•
Press the Shutter button to pause/play the video.
•
Press the Power button to fast forward the video.
•
Press the Mode button to reverse the video.
•
Long-press the Shutter button to exit Video playback Mode.
► Also see Manual configuration under Camera Setup (Configuration), above

Firmware Update

New firmware versions usually correct issues found in previous versions but often
provide new functionality which was not previously available.
Use mSetup (Tools) to automatically update the firmware. This is by far the easiest
method.
Manual Firmware Update
DO NOT PRESS ANY BUTTONS during the firmware update process.
There are two methods with which you can update the firmware.
Method 1 without pressing any buttons (recommended method):
•
Turn off the camera.
•
Connect the camera to the computer and wait until the card is recognized as a
Removable Drive.
•
Copy the new firmware files into the camera's flash card root folder.
•
Disconnect the camera from the computer and wait until it turns off.
•
Wait until all the LEDs are turned off.
•
Connect the camera to the PC. The green LED, indicating the battery is charging,
may turn on. WAIT.
•
The LEDs will blink rapidly indicating the firmware is being updated.
•
The firmware will be updated when the LEDs stop flashing and the camera is
recognized as a Removable Drive.
•
The firmware file will have been automatically deleted.
WAIT