Webcam Mode - Mobius Mini2 User Manual

Recording Video Mode 1 or 2 (yellow or blue LED)
Start video recording.
•
Briefly press the shutter button.
•
► If the recording LED has been disabled, the yellow or blue LED will slowly blink 3 times
and then turn off, indicating that recording has started.
•
► If the recording LED has been enabled, the yellow or blue LED will slowly flash at 2
second intervals indicating that the camera is recording.
Stop video recording.
•
Briefly press the shutter button. The camera will return to the standby mode from which
the video was started.
Taking a Photo (red LED)
•
Briefly press the shutter button. The red LED will flash indicating that a picture was taken.

Webcam Mode

There are two methods with which you can enter Webcam Mode.
Method 1:
•
Remove the flash memory card.
•
Connect the camera to the PC using a standard USB cable.
•
The yellow LED will first turn on but will be replaced by the red LED when the camera is
ready.
•
► If this is the first time you have connected the camera in WebCam mode, Windows will
automatically install the required drivers. This may take a few minutes.
•
The camera is now in Webcam mode.
•
Start your favorite WebCam software, such as the W10/11 native "Camera" APP or a
third party program such as AMCap (vers 9.23 or above). If your screen is black and the
camera lens cap is removed, the software is not configured correctly or is not compatible
with the driver. The W10/11 Camera App will find and automatically recognize any single
connected compatible webcam. For other programs such as AMCap, make sure the
program shows the "TLCAM" as the "device" selected for video capture. If this option
does not show in the "device" option list, restart the webcam program and check again.
•
There is no audio available in Webcam mode.