Osd (On-Screen Display) Menu; Firmware Update - Mobius Maxi User Manual

OSD (On Screen Display) Menu
Connect the camera to a monitor or TV and then turn it on.
► Long Press the Shutter button (top left) to enter Setup Mode. See above (Camera
Setup - Manual configuration).
► To enter Playback Mode, press the Mode button (top right) to cycle from Video
Mode1 -> Video Mode2 -> Photo Mode -> Playback Mode.
► When in Video Mode1, Video Mode2 or Photo Mode double-click the Shutter button
(top left) to turn the OSD overlay (text/icons) off or on.
► When in Video Mode1 or Video Mode2 double-click the Mode button (top right) to
turn the microphone on or off.
► Playback Mode. Double-click the Mode button (top right) to cycle between the Video,
Photo and Locked folders
•
Double-click the Mode button (top right) to cycle between the Video, Photo and
Locked folders
•
Use the Mode (Down) or Power (Up) buttons to select the file to play.
•
In Video Mode, briefly press the Shutter button (top left) to play the video. See
below (Playback Mode -> Video playback)
•
In Photo Mode, double-click the Shutter button (top left) to exit Playback mode
and return to Video Mode1.
•
Double-click the Shutter button (top left) to exit Playback mode and return to
Video Mode1.
► Playback Mode -> Video playback
•
Press the Shutter button (top left) to pause/play the video.
•
Press the Power button (large button in the top center) to fast forward the video.
•
Press the Mode button (top right) to reverse the video.
•
Long-press the Shutter button (top left) to exit Video playback Mode.
► In-Camera formatting is also available via the OSD menu.
► Also see Manual configuration under Camera Setup (Configuration), above

Firmware Update

New firmware versions usually correct issues found in previous versions but often
provide new functionality which was not previously available.
Use mSetup (click the 'Tools' button) to automatically update the firmware. This is by
far the easiest method.
► Prior to firmware version 2.26 it was possible to update the firmware without
connecting external USB power or your computer. Because of the possibility of
corrupting the boot loader (bricking the camera) in case of a weak battery or when
using a Supercapacitor, this method is no longer supported.