Adjusting The Cassette Joint - Shimano ALFINE Inter-11 Dealer's Manual

ADJUSTMENT

Adjusting the cassette joint

ADJUSTMENT
„ Adjusting the cassette joint
For internal 8-speed
1
(B)
To be continued on next page
Change the shift lever setting from 8 to
4 .
Check to be sure that the yellow setting
lines on the cassette joint bracket and
pulley are aligned at this time.
If the yellow setting lines are not
aligned, turn the cable adjustment barrel
of the shift lever to align the setting
lines.
After this, move the shift lever once
more from 4 to 8 and then back to 4 ,
and then re-check to be sure that the
yellow setting lines are aligned.
(A)
32
(A)
Yellow setting lines
(B)
Cable adjustment barrel
TECH TIPS
•
The yellow setting lines on the cassette
joint are located in two places. Use the one
that is easiest to see.
< When bicycle is standing up >
Should be aligned
Pulley
Bracket
< When bicycle is upside down >
Pulley
Should be aligned
Bracket